Products

Current location:

Home >   Products   >   Open-loop stepper motors
LS28A008-B3B10 (2).jpg
LS28A008-B3B10 (3).jpg
LS28A008-B3B10 (4).jpg
LS28A008-B3B10 (5).jpg
LS28A008-B3B10 .jpg

LS28A008-B3B10 Hybrid Stepper Motors

LEESN new generation 28mm*28mm(NEMA11) two-phase 1.8° open-loop stepper motor, compact design, low heating, high stability, high consistency, greater torque, higher performance, recommended for the driver DM420.
① Spindle mode:
Provide single flat, double flat, keyway, hobbing and other shaft delivery modes;
② Lead mode:
According to different application requirements, provide customized winding and routing methods;
③ Accessories selection:
A variety of accessories for stepper motors are available, such as encoders, planetary reducers, power off brakes.

Stepper motor is a kind of mechanical device that converts electrical pulse directly into Angle position, the amount of Angle depends on the number of pulses, it and its matching stepper motor drive device together constitute a set of simple control, but low cost open-loop system.

Matching products

Specification parameters
  • Phase number
    two-phase
  • Step Angle
    1.8 °
  • Step Angle error
    Below ±0.09°
  • Fuselage length
    32mm
  • Axis length
    24mm
  • Shaft diameter
    5mm
  • Rated current
    1.0 A
  • Holding torque
    0.08 N.M
  • Phase resistance
    1.5 Ω
  • Phase inductance
    1.1 mH
  • Moment of inertia
    ≈9g.c㎡
  • weight
    ≈100g
  • Service temperature range
    0 ℃ + 50 ℃
  • Service humidity range
    20%RH - 90%RH

Related products